The continuously variable transmission (CVT)

English version car engineer

The variable diameter pulley CVT

A CVT transmission consists of a driving shaft and a driven shaft, each of which has a pulley splined onto it. Each pulley comprises two conical sheaves that face each other. A metallic pushbelt runs in the V-groove between the two conical sheaves of each pulley.

The pushbelt (See glossary) forms the link between the driving and the driven shaft, transmitting the drive power by means of shear force from the engine to the wheels. The transmitted shear force makes the pushbelt as strong as a steel rod, thereby enabling torques of over 400 Nm to be transmitted. Pushbelt is made of hundreds of specially pressed steel elements which are strung together between two rings made of layers of high-alloy steel. This design makes the pushbelt flexible and at the same time strong enough to transmit torque.

Variable pitch radius principle

One sheave of each pulley can slide along each its shaft, continuously adjusting the pitch radius of the pushbelt and, in turn, the transmission ratio. The variable distance between the sheaves thus offers infinitely variable ratios. The continuously variable transmission ratio enhances ride comfort and dynamism.Expanded gear ratio range

Optimal engine operation

The special CVT transmission mechanism and electronic control provide an optimal balance between required torque and engine speed, thus allowing the engine to operate as efficiently as possible at all times. The gear ratio range (See glossary) from low to high gear can be high compared to manual gearbox, attaining a final gear reduction ratio of about 6, thanks to pulley and steel belt improvements and the use of high performance ATF (Automatic Transmission Fluid). With a wide ratio spread and highly precise control, the CVT delivers improved acceleration and fuel economy. However, those features have to be balanced with the increase in friction losses due to contact between pushbelt and puleys. Indeed, gain of having optimal engine operating points is lowered by greater frictions within the transmission system.

Toroidal CVT

The principle of toroidal CVT is the same as variable diameter pulley CVT. The engine’s power is transmitted to an input disc the rotational motion of which is transferred to the power rollers and then from the rollers to an output disc. By changing the tilt of the power rollers continuously, the toroidal CVT executes smooth and continuous gear ratio changes. The size of the circle traced by the contact point between the input disc and the power rollers and that of the circle traced by the contact point between the power rollers and the output disc vary according to the tilt of the power rollers. The ratio of the sizes of the circles corresponds to the ratio of the rotational speeds of the input and output discs, which is equal to the gear ratio.
When the circle on the output disc side is larger, the output disc rotates faster than the input disc. This corresponds to the low gear range of a conventional transmission (Low in the diagram below). Conversely, when the circle on the output disc side is smaller, the output disc rotates faster than the input disc. This corresponds to the top gear range of a conventional gearbox (High in the diagram below).Toroidal CVT principle

Main disadvantages of the CVT

The CVT’s biggest problem has been user acceptance. Because the CVT allows the engine to rotate at any speed, the noises coming from under the hood sound odd to ears accustomed to conventional manual and automatic transmissions. The gradual changes in engine note sound like a sliding transmission or a slipping clutch — signs of trouble with a conventional transmission, but perfectly normal for a CVT. Flooring an automatic car brings a lurch and a sudden burst of power, whereas CVTs provide a smooth, rapid increase to maximum power. To some drivers this makes the car feel slower, when in fact a CVT will generally out-accelerate an automatic.

Automakers have gone to great lengths to make the CVT feel more like a conventional transmission. Most CVTs are set up to creep forward when the driver takes his or her foot off the brake. This provides a similar feel to a conventional automatic, and serves as an indicator that the car is in gear. Other CVTs offer a “manual” mode that simulates manual gear changes.

Source: Bosch, Nissan

Romain’s opinion:

CVT technology appears to be very appealing from an engineering point of view. However, the customer acceptance is rather low in European countries due to the fact that the driver noise perception is different from a mechanical or step automatic transmission. Do you think final customer would go over this noise issue if the fuel economy gains would be higher with CVT?

Loved this? Spread the word

    About the Author

    Romain Nicolas

    Related posts

    General Altimax RT43 Tire Review for Touring and All-Seasons

    Read More

    Best Michelin Defender T+H Tire Review

    Read More

    Cooper Discoverer STT Pro Tire Review for Trucks and SUVs in All-Terrains and Seasons

    Read More

    Hankook Dynapro AT2 (All-Terrain, All-Season) Tire Review for Light Trucks and SUVs

    Read More
    Leave a Repl​​​​​y
    AJ Booysen Cancel reply

    Your email address will not be published. Required fields are marked

    This site uses Akismet to reduce spam. Learn how your comment data is processed.

    {"email":"Email address invalid","url":"Website address invalid","required":"Required field missing"}

    Subscribe to our newsletter now!