Engine

Injection system by Bosch

Injection pressure evolution in Diesel engine

Outlook “Over the next decade, the vast majority of diesel engines will manage with injection pressures of around 2,000 bar. Although 3,000 bar is not unrealistic, it will be limited to racing cars and high-performance diesel engines.”(Dr. Markus Heyn, President of the Diesel Systems division at Robert Bosch GmbH) Bosch Common-rail diesel The CRS3-25 common-rail […]

Injection pressure evolution in Diesel engine Read More »

Renault three-cylinder turbocharged engine titled at an angle of 49°

Renault 2013 innovations for improved engine fuel efficiency

The Renault Group is Europe’s number one car manufacturer for the low CO2 emissions performance of the passenger vehicles it sells (first half of 2013). This fits with Renault’s powertrain strategy which seeks to position the Renault Group durably as a European leader in the realm of low CO2 emissions and fuel consumption. The pursuit of this

Renault 2013 innovations for improved engine fuel efficiency Read More »

Cummins ISB6.7

Scania will equip its buses with Cummins ISB6.7 Euro6 engine

Cummins announced that the latest ISB6.7 engines will be supplied to Scania for use in their Euro 6 buses. Displayed on Cummins stand at Busworld (No.407 in hall 4), the 6-cylinder 6.7 liter ISB engine is available up to 306 ch for a range of ultra-low emission public transport solutions. Peak torque is at a level

Scania will equip its buses with Cummins ISB6.7 Euro6 engine Read More »

New Henkel Loctite 5810

New flexible gasketing technology by Henkel

Henkel is appearing at this year’s Productronica (November 12 to 15 in Munich, Germany), where it will be presenting, in particular, its liquid sealant and gasketing products for the automotive industry. With its two polyacrylate-based liquid gasketing products Loctite 5883 and Loctite 5810 B, Henkel is able to offer solutions which, thanks to their high

New flexible gasketing technology by Henkel Read More »

Opel 1.0l Turbo complete engine

Opel’s new 115hp 1.0l 3-Cylinder engine

Opel’s all-new three-cylinder celebrates its world premiere at the Frankfurt International Motor Show (September 12 – 22, 2013). Developing 85 kW/115 hp, this engine also delivers low-end torque of 166 Nm from 1,800 to 4,700 rpm, belying its diminutive size. The 1.0 SIDI Turbo (Spark Ignition Direct Injection) generates more torque throughout its operating range than equally powerful,

Opel’s new 115hp 1.0l 3-Cylinder engine Read More »